Table Of Contents

Mounting an Expansion Module on a DIN Rail

Version:
    Last Modified: May 15, 2018

    What to Use

    • Expansion Module for CompactRIO
    • DIN rail mounting kit, 786797-01
      • Standard DIN rail clip
      • M4 screw (x2)

    What to do

    Complete the following steps to mount the Expansion Module for CompactRIO on a DIN Rail.

    Figure 1. Mounting the Module on a DIN Rail
    1. Attach the DIN rail clip to the back of the module. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
      spd-note-note
      Note  

      You must use the screws provided with the NI DIN rail mounting kit because they are the correct depth and thread for the DIN rail clip.

    2. Snap the DIN rail clip onto the DIN rail.
      • Observe the spacing dimensions in the Mounting Requirements section.

    Recently Viewed Topics