Table Of Contents

Sample Clocked Buffered Pulse Measurement

Version:
    Last Modified: February 26, 2018

    A sample clocked buffered pulse measurement is similar to single pulse measurement, but a buffered pulse measurement takes measurements over multiple pulses correlated to a sample clock.

    The counter performs a pulse measurement on the Gate. On each sample clock edge, the counter stores the high and low ticks in the FIFO of the last pulse to complete. The sampled values will be transferred to host memory using a high-speed data stream.

    The figure below shows an example of a sample clocked buffered pulse measurement.

    Figure 1. Sample Clocked Buffered Pulse Measurement
    spd-note-note
    Note  

    If a pulse does not occur between sample clocks, an overrun error occurs.

    For information about connecting counter signals, refer to the Default Counter/Timer Routing section.


    Recently Viewed Topics