Table Of Contents

Deploying Your C Series Module in a Programming Mode in LabVIEW

Version:
    Last Modified: August 30, 2018

    Complete the following steps to deploy C Series modules in a new programming mode in the LabVIEW project.

    1. Locate your C Series module in your LabVIEW project. If you just created the project, all C Series modules appear under Real-Time Resources, which indicates that they are in the Real-Time (NI-DAQmx) programming mode.
    2. Drag your C Series module to Real-Time Scan Resources. This indicates you plan to use your module in Real-Time Scan (IO Variables) programming mode.
    3. Right-click the cRIO-905x in the project and select Deploy All to deploy the module in the Real-Time Scan (IO Variables) programming mode.

      Your module is now in Real-Time Scan mode.

    4. Drag your C Series module back to Real-Time Resources. This indicates you plan to use your module in Real-Time (NI-DAQmx) programming mode.
    5. Right-click the cRIO-905x in the project and select Deploy All to deploy the module in the Real-Time (NI-DAQmx) programming mode.

      Your module is now in Real-Time (NI-DAQmx) mode.

    Programming Examples

    For information on getting started with DAQmx programming mode examples in LabVIEW, go to ni.com/info and enter the Info Code criodaqmx. You can also access example projects in LabVIEW by selecting Help»Find Examples, and navigating to Hardware Input and Output»CompactRIO.


    Recently Viewed Topics