Table Of Contents

Connecting the Controller to the Host Computer

Version:
    Last Modified: August 30, 2018

    Use this topic to learn how to properly connect your cRIO-905x to your host computer.

    spd-note-note
    Note  

    Refer to cRIO-905x Ports and Connectors in the Features section for connector and port locations on the cRIO-905x.

    Complete the following steps to connect the cRIO-905x to the host computer using the USB Type-C Device Port with Console Out.

    1. Power on the host computer.
    2. Connect the cRIO-905x to the host computer using the USB-Type-C-to-Type-A cable (included in kit), inserting the USB Type-C connector into the USB Type-C Device Port with Console Out. Connect the other end of the USB cable (Type-A) to the host computer.

      The device driver software automatically detects the cRIO-905x. Select Configure and install software to this device.

      If the device driver software does not detect the cRIO-905x, verify that you installed the appropriate NI software in the correct order on the host computer as described in Installing Software on the Host Computer.


    Recently Viewed Topics