Table Of Contents

Mounting the cRIO-904x on a Panel

Version:
    Last Modified: August 30, 2018

    Complete the following steps to mount your cRIO-904x on a panel.

    You can use the NI panel mounting kit to mount the cRIO-904x on a panel.

    What to use

    • cRIO-904x
    • Screwdriver, Phillips #2
    • NI panel mounting kit
      • 4-slot models - 157253-01
        • Panel mounting plate
        • M4 x 10 screws (x4)
      • 8-slot models - 157267-01
        • Panel mounting plate
        • M4 x 10 screws (x6)
    Figure 1. Mounting the 4-slot cRIO-904x on a Panel
    Figure 2. Mounting the 8-slot cRIO-904x on a Panel
    1. Align the cRIO-904x and the panel mounting plate.
    2. Fasten the panel mounting plate to the cRIO-904x using the screwdriver and M4 x 10 screws. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).

      You must use the screws provided with the NI panel mounting kit because they are the correct depth and thread for the panel mounting plate.

    3. Fasten the panel mounting plate to the surface using the screwdriver and screws that are appropriate for the surface. The maximum screw size is M5 or number 10.

    Recently Viewed Topics