Table Of Contents

Mounting the cRIO-904x on a Flat Surface

Version:
    Last Modified: August 30, 2018

    Complete the following steps to mount your cRIO-904x directly on a flat surface.

    For environments with high shock and vibration, NI recommends mounting the cRIO-904x directly on a flat, rigid surface using the mounting holes in the cRIO-904x.

    What to Use

    • cRIO-904x
    • M4 screws, user provided, which must not exceed 8 mm of insertion into the cRIO-904x
      • x4 for 4-slot models
      • x6 for 8-slot models
    Figure 1. Mounting the 4-slot cRIO-904x Directly on a Flat Surface
    Figure 2. Mounting the 8-slot cRIO-904x Directly on a Flat Surface
    1. Prepare the surface for mounting the cRIO-904x using the cRIO-904x Surface Mounting Dimensions.
    2. Align the cRIO-904x on the surface.
    3. Fasten the cRIO-904x to the surface using the M4 screws appropriate for the surface. Screws must not exceed 8 mm of insertion into the cRIO-904x. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).

    Recently Viewed Topics