Table Of Contents

Mounting the cRIO-904x on a DIN Rail

Version:
    Last Modified: August 30, 2018

    Complete the following steps to mount your cRIO-904x on a DIN rail.

    You can use the NI DIN rail mounting kit to mount the cRIO-904x on a standard 35-mm DIN rail.

    What to use

    • cRIO-904x
    • Screwdriver, Phillips #2
    • NI DIN rail mounting kit
      • 4-slot models - 157254-01
        • DIN rail clip
        • M4 x 10 screws (x2)
      • 8-slot models - 157268-01
        • DIN rail clip
        • M4 x 10 screws (x3)
    Figure 1. Mounting the 4-slot cRIO-904x on a DIN Rail
    Figure 2. Mounting the 8-slot cRIO-904x on a DIN Rail
    1. Align the cRIO-904x and the DIN rail clip.
    2. Fasten the DIN rail clip to the cRIO-904x using the screwdriver and M4 x 10 screws. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).

      You must use the screws provided with the NI DIN rail kit because they are the correct depth and thread for the DIN rail clip.


    Recently Viewed Topics