Table Of Contents

Deploying Your C Series Module in a Program Mode in LabVIEW

Version:
    Last Modified: May 11, 2018

    Complete the following steps to deploy C Series modules in a new program mode in the LabVIEW project.

    1. Locate your C Series module in your LabVIEW project. If you just created the project, all C Series modules appear under Real-Time Resources, which indicates that they are in the Real-Time (NI-DAQmx) program mode.
    2. Drag your C Series module to Real-Time Scan Resources. This indicates you plan to use your module in Real-Time Scan (IO Variables) program mode.
    3. Right-click the cRIO-904x in the project and select Deploy All to deploy the module in the Real-Time Scan (IO Variables) program mode.

      Your module is now in Real-Time Scan mode.

    4. Drag your C Series module back to Real-Time Resources. This indicates you plan to use your module in Real-Time (NI-DAQmx) program mode.
    5. Right-click the cRIO-904x in the project and select Deploy All to deploy the module in the Real-Time (NI-DAQmx) program mode.

      Your module is now in Real-Time (NI-DAQmx) mode.

    Programming Examples

    For information on getting started with DAQmx programming mode examples in LabVIEW FPGA, go to Embedded Programming with LabVIEW and CompactRIO. You can also access example projects in LabVIEW by selecting Help»Find Examples, and navigating to Hardware Input and Output»CompactRIO.


    Recently Viewed Topics