Table Of Contents

Deploying Your C Series Module in a Program Mode in LabVIEW FPGA

Version:
    Last Modified: January 1, 2018

    Complete the following steps to deploy C Series modules in a new program mode in the LabVIEW project.

    1. Locate your C Series module in your LabVIEW project. If you just created the project, all C Series modules appear under the FPGA Target, which indicates that they are in the LabVIEW program mode.
    2. Drag your C Series module to Real-Time Scan Resources. This area of the project deploys your module in Real-Time Scan (IO Variables) program mode.
    3. Right-click the cRIO-904x in the project and select Deploy All to deploy the module in the Real-Time Scan (IO Variables) program mode.

      Your module is now in Real-Time Scan mode.

    4. Drag your C Series module to Real-Time Resources. This area of the project deploys your module in Real-Time (NI-DAQmx) program mode.
    5. Right-click the cRIO-904x in the project and select Deploy All to deploy the module in the Real-Time (NI-DAQmx) program mode.

      Your module is now in Real-Time (NI-DAQmx) mode.

    Programming Examples

    For information on getting started with DAQmx programming mode examples in LabVIEW FPGA, go to ni.com/info and enter the Info Code daq2comboExample.


    Recently Viewed Topics