Table Of Contents

Installing the C Series Modules

Version:
    Last Modified: August 30, 2018

    Complete the following steps to install a C Series module.

    1. Verify that power is not connected to the I/O connector(s) on the C Series module and the cRIO-904x.
      spd-note-note
      Note  

      If the system is in a nonhazardous location, the cRIO-904x can be powered on when you install modules.

    2. Press the latches on the C Series module.
    3. Align the C Series module with a slot and seat it in the slot until the latches lock in place.

    Recently Viewed Topics