Table Of Contents

Launching the BIOS Setup Utility

Version:
    Last Modified: August 30, 2018

    Complete the following steps to launch the BIOS setup utility.
    1. Connect a video monitor to the USB 3.1 Type-C DisplayPort connector on the cRIO-904x.
      spd-note-note
      Note  

      In order to connect the monitor to the USB 3.1 Type-C DisplayPort connector, you may need to use a VGA-to-Type-C or DVI-to-Type-C adapter.

    2. Connect a USB keyboard to the USB 2.0 host port on the cRIO-904x.
    3. Power on or reboot the cRIO-904x.
    4. Hold down either the <F10> key or the <Del> key until Please select boot device: appears onscreen.
    5. Use the Down Arrow key to select Enter Setup and press <Enter>. The setup utility loads after a short delay.
    The Main setup menu is displayed when you first enter the BIOS setup utility.

    Recently Viewed Topics