Table Of Contents

cDAQ-9184 Front Panel

Version:
    Last Modified: March 21, 2017

    1. Chassis Grounding Screw
    2. Installed C Series Module
    3. Module Slots
    4. Ethernet Connector, LINK/ACT and 10/100/1000 LEDs
    5. 9-30 VDC Power Connector
    6. Reset Button
    7. POWER, STATUS, and ACTIVE LEDs
    Table 1. LED State/Chassis Status
    LED LED State Chassis Status
    POWER On Power on.
    Off Power off.
    STATUS On Chassis firmware booting, updating, or resetting to factory default.
    Off Normal operation.
    3 Blinks Firmware image corrupted, update firmware through recovery utility. To download the recovery utility, go to ni.com/info and enter the Info Code cdaqrecoveryutility.
    ACTIVE On A DAQ task is running on the chassis.
    Off A DAQ task is not running on the chassis.
    Table 2. Ethernet LED Indications
    LED Color LED State Chassis Status
    10/100/1000 Yellow On Connected at 1,000 Mbit/s.
    Green On Connected at 100 Mbit/s.
    Off No Ethernet connection or 10 Mbit/s connection.
    LINK/ACT Green On Ethernet link.
    Blinking Ethernet activity.
    Off No Ethernet connection.

    Recently Viewed Topics