Table Of Contents

I/O Parameters

Version:
    Last Modified: September 6, 2017

    When you select a configuration for a channel, the I/O Configuration table enables the appropriate parameters. Refer to the following table for the parameters associated with each configuration.

    Table 1. I/O Configuration Parameters
    Signal Type Configuration Parameters
    Digital Inputs Single input True value, Debounce filter
    Single input with test pulse Test pulse period, Test pulse width, True value, Debounce filter, Output line load
    Dual input True value, Discrepancy time, Debounce filter, Complementary
    Dual input with test pulse Test pulse period, Test pulse width, True value, Discrepancy time, Debounce filter, Complementary, Output line load
    Digital Outputs Single output Default value, Output line load, Flash period
    Single output with external readback Default value, Readback delay, Output line load, Flash period, Debounce filter
    Single output with internal test pulse Default value, Test pulse period, Test pulse width, Output line load, Flash period
    Single output with external test pulse Default value, Test pulse period, Test pulse width, Output line load, Flash period, Debounce filter
    Dual output Default value, Output line load, Flash period
    Dual output with Internal test pulse Default value, Test pulse period, Test pulse width, Output line load, Flash period
    Dual output with external test pulse Default value, Test pulse period, Test pulse width, Output line load, Flash period, Debounce filter
    UserLED0 LED Default value, Flash period

    Recently Viewed Topics