Table Of Contents

Configuring I/O Channels

Version:
    Last Modified: September 6, 2017

    1. Open the I/O Configuration table.
    2. Select the appropriate channel in the Digital Input or Digital Output table.
    3. Click the channel name in the Name column to rename the channel, if necessary.
      spd-note-note
      Note  

      You must use the channel name set in the I/O Configuration table when programming output values and transitions.

    4. Click the cell in the Configuration column to select the configuration type for that channel.
    5. Update the I/O parameters, as necessary.
    6. Repeat steps 2 through 5 for all connected channels.
    7. Verify that you have done the following:
      • Set a default value for all configured digital outputs.
      • Selected Fail-safe for applicable fault diagnostics.
      • Set a default value for all variables.

    Recently Viewed Topics