Table Of Contents

NI 9862

Version:
    Last Modified: February 24, 2017

    1-Port High-Speed/FD NI-XNET CAN C Series Module

    • Full high-speed/FD CAN interface(up to 8 Mbit/s) with onboard TJA1041 transceiver, externally powered
    • NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++
    • Integrated CAN databases for importing, editing, and using signals from FIBEX, .DBC, and .NCD files
    • Synchronization and triggering with other NI CompactDAQ and NI CompactRIO modules
    • Bundled software: NI-XNET driver, Bus Monitor, and Database Editor for Windows
    • In CompactRIO, use in NI cRIO-911x/908x/906x/903x chassis with LabVIEW FPGA installed

    The NI 9862 is a 1-port, high-speed/FD controller area network (CAN) NI CompactDAQ and NI CompactRIO interface for developing CAN applications in NI LabVIEW, NI LabWindows/CVI, and ANSI C/C++. As part of the NI-XNET platform, the NI 9862 works well for applications requiring high-speed manipulation of hundreds of CAN frames and signals. You can perform this manipulation while taking other data acquisition measurements in the same NI CompactDAQ hardware platform or while performing low-level FPGA control and embedded monitoring in the same NI CompactRIO chassis.


    Recently Viewed Topics