Courseware: Measurements and Instrumentation Introduce and reinforce measurements and instrumentation concepts with courseware covering topics in basic measurements, sensors, mechanical measurements, bioinstrumentation, green engineering, and more.

Showing 1-10 of 19 results

More for Teaching Measurements and Instrumentation

View Product Bundles

Find integrated hardware and software solutions and see how other educators are adopting them.

See products

Get Free Courseware Packets

Download pre-bundled resource kits of tutorials and teaching resources by course area.

Download packets

Teach a Tough Concept

Explain the use of the frequency domain by connecting to hardware and acquiring and filtering a real measurement.

View the tutorial now

Search Results

Measuring Angular Position with myDAQ and Sparkfun IDG500 Dual Axis Gyroscope Breakout Board www.ni.com/example/31456/en/
Detect angular rotation with Sparkfun's IDG500 Dual Axis Gyroscope breakout board and National Instruments myDAQ in LabVIEW. Acquire data using the DAQ Assistant, which is provided...
Rating: 3.80 Last Modified: November 12 2010 Download Example

Display Integer Using a 7-Segment LED, NI myDAQ, and LabVIEW www.ni.com/example/31409/en/
This document explains using a low-cost 7-Segment LED to output a numeric integer with your National Instruments myDAQ in LabVIEW. The digital output will be generated on the myDAQ...
Rating: 2.56 Last Modified: July 23 2010 Download Example

Measure Current Using NI myDAQ www.ni.com/example/31437/en/
This document explains using a National Instruments myDAQ to measure a current in LabVIEW. The current will be acquired on the myDAQ DMM channel using a DAQ Assistant that is insta...
Rating: 3.00 Last Modified: July 23 2010 Download Example

Measure Voltage Using NI myDAQ www.ni.com/example/31436/en/
This document explains using a National Instruments myDAQ to measure a voltage in LabVIEW. The voltage will be acquired on the myDAQ DMM channel using a DAQ Assistant that is insta...
Rating: 3.50 Last Modified: July 23 2010 Download Example

Measure Temperature using a RTD, myDAQ, and LabVIEW www.ni.com/example/31412/en/
This document explains using a Platinum RTD to measure temperature with your National Instruments myDAQ in LabVIEW. The data will be acquired using the DAQ Assistant that is instal...
Rating: 3.46 Last Modified: July 23 2010

Explore Electrocardiogram (ECG) Signals in Multisim www.ni.com/example/31327/en/
An electrocardiogram (ECG) is a graphic tracing of the variations in electrical potential detected at the body surface caused by the excitation and relaxation of the heart muscle. ...
Rating: 2.60 Last Modified: March 27 2012 Download Example

Hearing Aid Example in NI Multisim www.ni.com/example/31328/en/
Download the .zip file below featuring labs and Multisim circuit files for exploring the use of op-amps and filter circuits to design a simple hearing aid with Multisim and the NI ...
Rating: 4.00 Last Modified: March 27 2012 Download Example

Exploring Wheatstone Bridges with NI Multisim www.ni.com/example/31325/en/
The Wheatstone bridge is a technique for measuring voltage or resistance changes. The voltage between the midpoints of two parallel voltage dividers is measured, and the value of o...
Rating: 4.00 Last Modified: March 27 2012 Download Example

Interfacing VIs for Vernier Biosensors www.ni.com/example/31019/en/
Vernier, a leading sensors and transducers company has several biomedical engineering sensors that can be used by educators to teach biomedical engineering concepts by interfacing ...
Rating: 3.00 Last Modified: December 06 2011 Download Example

NI ELVIS II Photogate Timing Lab www.ni.com/example/30944/en/
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Photogate sensor is connected to the protoboard and measu...
Rating: 1.00 Last Modified: March 29 2011 Download Example

Search Syntax Summary

OperatorExampleActionBoolean Equivalent
" " "temperature monitoring" Requires two terms to be adjacent to each other. In this example, only documents containing the phrase "temperature monitoring" will be shown. ADJ
+ +temperature Requires this term to be present as-is, eliminating the use of synonyms. This search query can be used in conjunction with other keywords to find only documents containing the word "temperature". AND
- -monitoring Excludes results containing this term. Use this query in conjunction with other terms to find only documents not containing the word "monitoring" NOT
* monitor* Acts as a wildcard. This example will return documents containing words "monitor", "monitoring", "monitored", etc n/a

Basic Tips

  • Search is not case sensitive. Searching for LabVIEW is the same as searching for labview.
  • Keep your query short and focused, including all relevant keywords. For example, searching for labview error is much more vague than labview error 1041.
  • Usually, all punctuation and special characters are interpreted as delimiters and are ignored. See exceptions on the Syntax page. Be especially careful when using a minus sign in front of an error number, as it excludes it from the results.
  • Search for keywords you would expect to see on a page. For example, terms pxi does not work are unlikely to appear in technical documentation. The query like analog output noise will return better search results.

Advanced Tips

  • You locale settings identify your current geographical location and affect your search results. For example, if you set your country to Japan, Japanese documents will get boosted in your search results. Check your locale settings in the top right corner of the search page.