Analysis in Embedded ApplicationsRapidly design, prototype, and deploy embedded systems with NI LabVIEW graphical programming software and tightly integrated, off-the-shelf hardware. Using LabVIEW, you can interface with common third-party tools to model and simulate your design and improve it by prototyping with real-time deterministic systems, FPGAs, and modular I/O. Finally, you can deploy to either off-the-shelf or custom hardware for shorter design cycles. Take advantage of NI embedded tools to more efficiently design:
Common Analysis AlgorithmsFast Fourier Transform - The fast Fourier transform (FFT) and the power spectrum are powerful tools for analyzing and measuring signals. FFTs are useful for measuring the frequency content of stationary or transient signals. They produce the average frequency content of a signal over the entire time that the signal is acquired. Statistics - Statistical measurements are typically used to determine the characteristics of different system components, such as mean, variance, and standard deviation. Statistical information about system components is important to the design and prototyping of embedded applications. Control Design and Simulation - Engineers can employ control design techniques to construct plant models in state-space, transfer function, or pole-zero-gain as well as analyze system performance with pole-zero maps, step response graphs, and Bode plots. Through simulation, engineers can develop dynamic systems such as motor controllers and hydraulic simulators and simulate linear, nonlinear, and discrete systems. Case Studies
The mark LabWindows is used under a license from Microsoft Corporation. LearnTryBuy |
